Wedding lighting considerations
The use of the lighting in the candlelight wedding
Candle-lit weddings are becoming more and more accepted and adopted by new people. Floodlights are one of the most essential props. The beautiful bride is in the anticipation of the star candle. All of a sudden, the light column that came down to the stage of the stage pointed to the happiness door, and the whole room quieted down, as the wedding march was played, and the new people became the bright spots in the crowd. The guests of the scene were all focused on the wedding stage with the movement of the floodlights, and a memorable wedding took place...
The use of field lights is especially important, and there are a few lessons to share with you:
The "spotlight" is a professional stage lighting that has only been used in the wedding scene in recent years. The design structure of the laser light is more complex than normal lighting so the staff must be trained before the job. Avoid accidents, affect the wedding scene.
Now wedding company commonly use the floodlight of 1200W, the light source is dysprosium lamp, the starting power is higher than the normal working power. So the power supply should be selected by the cable of 2.5 square meters alone to find the field electrician directly from the electric well. Prevent overloading of power lines, and more serious power lines are causing fires.
The lamp will have to be used before the official use, because now the use of the built-in transformer floodlight, when the voltage shortage will cause the floodlight to be self-checked for a long time without the car. To avoid being caught off guard.
How many lamps are used in the scene? "A lot of friends asked me. Personally, it's better to have two or more. Because, the floodlight is a cold light source, the light column concentration is not scattered. Follow spot according to the object, as smooth and backlight surface contrast is very big, candlelight wedding less light there is no way to fill light, so a follow spot according to new people in the face can cause face of Yin and Yang, the couple go happiness passage of time is a backlight commonly, after the ceremony on the stage of is all side light, very affect the new image. If two or more lights are lit at the same time, there will be no additional light to be taken as an appeal.
What should a candlelight wedding photographer pay attention to? Most commonly used domestic follow spot, because the wedding company the design without SCR button adjustable lighting source, so the couple no matter how far away from the follow spot the brightness of the light are the same, thus causing the photographer set the white balance in the distance, such as new close up, if you don't change to manual zoom lens, lens is maxed out. The light of the light of the candle light wedding is less, the light is not filled, the machine had better choose 3ccds and the above model, such as SONY190P, SONY digital high definition, BETCOMA machine and other planes ensure the clear effect. At the site, two or more cameras will be selected to ensure the complete and complete picture. See the main points of photography in detail - the main points of photography in the wedding.
The placement and height requirements of the lamp. If two lamps are worn by a new person on stage one. Another stand is being used during the entrance to the stage for lighting and ceremony. If there is a third one, the second one should be placed in parallel with the second one. The lamp is more than 2.5 meters high, and the lamp doesn't shoot directly. The on-site operation bracket is suitable for the table. But it has to be stable, and there's no scratching around the lights.
7. Use and maintenance of the lighting equipment. The equipment cost is high, big, heavy and complicated, so there must be special people to watch and use. Light and light in the carriage, a special revolving box for the lamp. The brackets must be firm and smooth, and the two must be finished when the light is on. Turn on the switch and wait for the machine itself to check for about 5 to 8 seconds after it is turned on. See the instructions in detail. But be sure to notice that the last time you turn off the car is to stop for more than 10 minutes, don't switch frequently, and the light bulb will burn out. A normal bubble will cost at least 120 yuan (danton production). When replacing the bulb, wait for the machine to cool down. Don't touch the glass in the middle of the bulb. Keep it firm. The light body vent should be unimpeded to prevent the heat dissipation.
